DAP RapidFuse All Purpose Adhesive
Online Exclusive
This fast setting formula sets in only 30 seconds with a cured bond in just 30 minutes. New hybrid adhesive technology creates a bond that won't get brittle over time for two times better durability than regular super glues. Get a clear bond with no expanding foam, no dripping glue and no mess. Appropriate for indoor or outdoor use, RapidFuse is water resistant and works on most common household materials, from wood, metal, rubber, plastics, ceramics + porcelain, to glass, fabric, stone, concrete, tile + more.
- Bonds virtually everything
- 30 second set time
- 30 minute cure time
- Dries clear
- No drip
- Fine tip applicator
- Interior/exterior use
Tips on Usage:
- 30 Minute Cure Time
Set your repair down and walk away while it cures in 30 minutes. - Clean The Surface
To get a good bond, make sure the surface is clean and dry before applying. - Use a Small Amount
Do not use too much - just enough to cover the area you intend to bond with a thin coat of adhesive. - Plastic Primer Marker
If fusing plastics be sure to use plastic primer marker on all plastic surfaces being fused and wait 60 seconds prior to applying adhesive. - Didn't Get the Placement Right?
If you didn’t get the placement right to start, you can pull the two materials apart and realign them before applying another 30 seconds of pressure. - Squeeze the Two Substrates
Squeeze the two substrates you are bonding together tightly for 30 seconds. Wipe away any excess or “squeeze out” with a dry paper towel.
*Please note that DAP RapidFuse All Purpose Adhesive 16g has a brush applicator.
