Nippon Paint Odour-less Anti-Mould Ceiling White 1L / 5L

Odour-less Anti-Mould Ceiling White is an environmentally favourable green product formulated with anti-mould properties with abroad-spectrum protection against most species of mould

?Almost No Paint Odour
?Anti-Mould
?Excellent Stain Resistant
?Easy application and touch-up
?Resistant to blistering and peeling
?Water-resistant
?Excellent coverage and hiding power
?Long-lasting
?Excellent flow and levelling
?Minimum roller splatter
?Fast-drying
?No Lead or Mercury added
?Heavy metal free
?Non-toxic

Finish : Matte

Use This Paint If...
✔You are sensitive to paint odours
✔You do not want to worry about the growth of fungus or mould on your ceilings
✔You want a ceiling paint for especially damp areas in your home

Where Can You Use It?
✔On interior masonry surfaces and ceilings of commercial and residential areas such as hospitals, schools, offices and residential buildings.
✔Damp areas such as kitchens, bathrooms and areas around air-conditioners.

Application:
METHOD:
Roller or brush

THEORETICAL COVERAGE:
Approx. 9-10 m2 / litre

DRYING TIME:
Surface Dry – 30 minutes at 30°C
Hard Dry – 2 hours at 30°C

OVERCOATING TIME:
2 hours based on normal conditions

Surface Preparation:
Ensure surface is clean, dry and stable using the following suggested surface treatments:
⚫Moisture: There must not be any water residue on the surface of the substrate. Moisture must be <4% (Sovereign moisture master) before application
⚫Unstable matter: Remove loose bonding film, dirt, peeling paint, etc by high-pressure water jet wash or mechanical means such as power brush or scraper, whichever is suitable
⚫Contaminants: Remove dust and foreign matter by cleaning with damp cloth. Remove oil or grease using solvent or mild detergent. Allow surface to dry
⚫Fungus and Algae: Wash the affected area to remove unstable matters and micro-organisms. Apply Anti-Fungus Solution and leave on for at least 2 hours
⚫Hairline cracks: Fill cracks with suitable exterior grade water-resistant putty or filler