Nippon Paint Odourless Ultra Fresh Air White 1L / 5L (Formaldehyde-Free)

Odour-less Ultra Fresh Air is an ultra-premium interior paint with a refined matte finish, meticulously engineered to be virtually odour-free. It continuously enhances indoor air quality by absorbing harmful formaldehyde and incorporates advanced anti-viral properties. It has an extremely low odour during and after application, making it an excellent choice for repainting projects in occupied spaces.

?Near Zero VOC
?Anti-viral property
?Ultra-low odour
?Fungus & mould resistant
?Excellent Washability
?Anti-bacterial property
?Excellent flow & levelling
?Spatter resistance
?Air purifying - formaldehyde abatement property
?Excellent stain resistance
?Excellent coverage & hiding power
?Free from Alkylphenol Ethoxylate (APEO) & formaldehyde
?Does not contain lead and mercury
?Does not contain heavy metals
?Environmentally friendly paint certified under the Singapore Green Building Product Certification Scheme
?Soft matt

Use This Paint If...
✔You are sensitive to paint odours
✔You do not want pollutants emitted into the air in your house
✔You want a paint that protects against mould, mildew and bacteria that cause stains on the paint film

Where Can You Use It?
Eco-sensitive commercial and residential areas such as elderly, children bedrooms or nurseries.

Application:
METHOD:
Roller, brush or spray

THEORETICAL COVERAGE:
10-12 m2 / litre, depending on surface texture, substrate porosity and method of application

DRYING TIME:
Surface Dry – 30 minutes at 30°C
Hard Dry – 2 hours at 30°C

OVERCOATING TIME:
2 hours minimum based on normal conditions

Surface preparation:
Ensure surface is clean, dry and stable using the following suggested surface treatments:
⚫Moisture: There must not be any water residue on the surface of the substrate. Moisture must be <4% (Sovereign moisture master) before application
⚫Unstable matter: Remove loose bonding film, dirt, peeling paint, etc by high-pressure water jet wash or mechanical means such as power brush or scraper, whichever is suitable
⚫Contaminants: Remove dust and foreign matter by cleaning with damp cloth. Remove oil or grease using solvent or mild detergent. Allow surface to dry
⚫Fungus and Algae: Wash the affected area to remove unstable matters and micro-organisms. Apply Anti-Fungus Solution and leave on for at least 2 hours
⚫Hairline cracks: Fill cracks with suitable exterior grade water-resistant putty or filler