Gorilla Wood Glue Ultimate (Assorted Sizes)
Our most durable wood glue, this Ultimate formula is 100% waterproof and incredibly strong, but still easily cleans up with water. It is great for outdoor applications where temperatures or moisture might be a concern, as well as interior projects that could benefit from the extended working time and high strength.
- WATERPROOF: Passes the ANSI/HPVA Type 1 water-resistance.
- EXTENDED WORKING/OPEN ASSEMBLY TIME: Up to 15 minutes.
- REQUIRES ONLY 20-30 MINUTES OF CLAMP TIME: Fully cured in 24 hours.
- LOW APPLICATION TEMP: As low as 50°F
- INCREDIBLY STRONG & DURABLE: Withstands exposure to water, sun, and extreme
- temperatures.
- DRIES NATURAL COLOR: No Foam
Technical Specifications:
- Applications Temperature: 50 – 75°F (10 – 24°C), best at room temperature
- Service Temperature: 0 – 150°F (-17 – 66°C)
- Outdoor: Yes
- Moisture Resistant: Type I Waterproof
- Paintable: Yes
- Sandable: Yes
- Stainable: Yes
- Expands when cured: No
- Technical Standards: ANSI/HPVA Type I
- Storage Tips: Close cap after use. Store at room temperature. If glue thickens or separates, shake vigorously until restored to original consistency. STORE AWAY FROM CHILDREN AND ANIMALS.
- Gap Filling: No
Directions for Use:
- Clean and dry surfaces to be bonded.
- Shake well before use.
- Apply glue generously to the surface.
- Join and clamp for 20-30 minutes. Parts should fit tightly.
- Excess glue can be removed with a clean, wet cloth or scraped off after glue dries.
- Allow bond to dry for 24 hours.
- Remove applicator tip to clean out glue build up.
- *NOTE: Application temperature should be at or above 50°F. Before finishing, sand surfaces to minimize glue exposure.
- *Not recommended for structural or load bearing applications and not for continuous submersion or below-waterline use.
