Nippon Paint Matex Anti-Mould 7L
Matex Emulsion is a multi-purpose acrylic copolymer emulsion. It is formulated for a smooth matt finish for interior walls and ceilings
?Anti-Fungus
?Easy Application
?Economical
?Anti-algae properties
?Good coverage and hiding power
Finishing: Matt
Use This Paint If...
✔You do not want to worry about the growth of fungus or algae on your ceilings
✔You want a ceiling paint that has good coverage and hiding power
✔You want an economical paint for your surfaces
Where Can You Use It?
Suited for internal masonry surfaces such as soft boards, plastered walls, concrete, ceilings and wood.
Application Data
METHOD:
Roller and brush
THEORETICAL COVERAGE:
13 m2 / litre
DRYING TIME:
Touch Dry – 30 minutes at 30°C
OVERCOATING TIME:
2 hours based on normal conditions
Surface Preparation
Ensure surface is clean, dry and stable using the following suggested surface treatments:
⚫Moisture: There must not be any water residue on the surface of the substrate. Moisture must be <4% (Sovereign moisture master) before application
⚫Unstable matter: Remove loose bonding film, dirt, peeling paint, etc by high-pressure water jet wash or mechanical means such as power brush or scraper, whichever is suitable
⚫Contaminants: Remove dust and foreign matter by cleaning with damp cloth. Remove oil or grease using solvent or mild detergent. Allow surface to dry
⚫Fungus and Algae: Wash the affected area to remove unstable matters and micro-organisms. Apply Anti-Fungus Solution and leave on for at least 2 hours
⚫Hairline cracks: Fill cracks with suitable exterior grade water-resistant putty or filler
