Nippon Paint Vinilex 5170 Wall Sealer Wall Sealer Oil 1L / 5L

Nippon Paint Vinilex 5170 Oil-Based Wall Sealer contains a superior resin/binder, effective in preventing the degradation of finishing coats by alkaline surfaces. This wall sealer contains a blend of solvents that enables it to penetrate deeply and gives a firm base for subsequent coats

?Anti-Fungus
?Excellent Alkaline Resistance
?Good Adhesion
?Algae resistance property
?Efflorescence resistance to prevent discolouration
?Prevents resurfacing of stain marks on problem substrates
?Ideal for exterior surfaces
?Oil-based

Finishing: Matt

Use This Paint If...
✔You want to achieve a visibly smoother surface and better-looking result
✔You do not want to risk your paint flaking or peeling
✔You want to prevent chalking

Where Can You Use It?
As a sealer for internal and external masonry surfaces such as cement plaster, brickwork, hard/soft boards, gypsum and concrete.

Application:
METHOD:
Roller, brush or spray

THEORETICAL COVERAGE:
Approx. 16 m2 / litre

DRYING TIME:
Surface Dry – 20 minutes at 30°C
Hard Dry – 2 hours at 30°C

OVERCOATING TIME:
5 hours under normal conditions

Surface Preparation:
Ensure surface is clean, dry and stable using the following suggested surface treatments:
⚫Moisture: There must not be any water residue on the surface of the substrate. Moisture must be <4% (Sovereign moisture master) before application
⚫Unstable matter: Remove loose bonding film, dirt, peeling paint, etc by high-pressure water jet wash or mechanical means such as power brush or scraper, whichever is suitable
⚫Contaminants: Remove dust and foreign matter by cleaning with damp cloth. Remove oil or grease using solvent or mild detergent. Allow surface to dry
⚫Fungus and Algae: Wash the affected area to remove unstable matters and micro-organisms. Apply Anti-Fungus Solution and leave on for at least 2 hours
⚫Hairline cracks: Fill cracks with suitable exterior grade water-resistant putty or filler